Click on the image to check the artwork
By certification 
Specifications
8 Port 2.5G Switch product mode: FS-1008G2.5
FS-1008G2.5 is an Unmanaged 2.5G 8 ports switch, it can expand your network’s bandwidth and reduce traffic bottlenecks. These 2.5G switches come equipped with 2.5GBASE-T RJ45 ports that provide higher gigabit speeds capable of up to 2.5Gbps over your existing Cat5e or better cabling. Each high-speed 2.5G switch can be mounted to the wall for setup flexibility.
The fanless design lowers energy consumption and eliminates distracting operating noise. The FS-1008G2.5 switches are cost-effective solutions to increase your network’s throughput.
Standards |
IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3z IEEE802.3ab IEEE802.3bz |
Device Interface |
8 x 2.5GBASE-T ports (10Mbps/100Mbps/1Gbps/2.5Gbps) LED indicators |
Data Transfer Rate |
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5Gbps (full duplex) |
Performance |
Data RAM Buffer: 1.5MB Switch Capacity: 40Gbps MAC Address Table: 16K entries Forwarding rate: 29.76Mbps (64-byte packet size) Jumbo Frame: 12KB |
Special Features |
Wall-Mountable Fanless |
Power |
Input: 100-240V AC, 50/60Hz Output: DC 12V/1.5A |
MTBF |
1120000 hours |
Operating Temperature |
0℃-40℃ (32℉-104℉) |
Operating Humidity |
Max 90% non-condensing |
Dimensions |
183x120x34mm |
Weight |
0.43kg |
Warranty |
2 years |
Package contents |
FS-1008G2.5 Quick Installation Guide |
Others |
FAQ
Q: What is the application scenario of FS-1008G2.5 switch?
A: With the continuous improvement of broadband services provided by network providers, the broadband bandwidth has entered the period of 2000 Mbit/s. A 2.5G switch can meet users' requirements for high bandwidth.
Q: Why is an 8-port 2.5G switch designed?
A: In the general actual use scenario, for family use, 5 is not enough, 16 is too much, lack of cost performance, and 8 is a good balance.
Q: Will the 2.5G SWITCH be a transitional switch?
A: Currently, 2.5G switches have a minimum of 5 years of life. For one reason, operators to 2000M broadband, now is the beginning, need to continue for a period of time. Another reason is that the reading speed of the mechanical hard disk, 2.5g transmission rate can meet the full rate, while the mechanical hard disk, although in the continuous exit from the market, but good cost performance, still has a certain period of use.
http://www.fujanet.com/
