Click on the image to check the artwork
By certification 
Features
1 Crusher jaw has a deep crushing cavity and no dead zone, which improves the feeding capacity and output.
2 The product particle size is uniform and has a large crushing ratio.
3 The gasket type discharge port adjustment device is reliable and convenient, the adjustment range is large, and the flexibility of the equipment is increased.
4 The lubrication system is safe and reliable, the component replacement is convenient, and the equipment maintenance is simple.
5 The structure is simple, the work is reliable, and the operating cost is low.
Parameter
Model |
Motor power(kw) |
Processing capacity (m³/h/t) |
Weight (t) |
Feed port size(mm) |
Discharge size(mm) |
150*250 |
5.5 |
2-6 |
1 |
125 |
15-45 |
200*300 |
11 |
4-14 |
1.5 |
180 |
20-50 |
200*350 |
11 |
5-15 |
1.8 |
180 |
20-50 |
250*400 |
15 |
5-22 |
2.8 |
210 |
20-50 |
400*600 |
30 |
16-60 |
7 |
340 |
40-80 |
500*750 |
55 |
43-102 |
13.5 |
425 |
50-100 |
600*900 |
75 |
51-145 |
19.2 |
500 |
65-180 |
750*1060 |
110 |
122-223 |
29 |
630 |
80-180 |
900*1200 |
132 |
280-430 |
45 |
780 |
95-180 |
150*750 |
15 |
8-28 |
3.5 |
120 |
18-48 |
250*750 |
22 |
22-60 |
5.5 |
210 |
25-60 |
250*1000 |
30 |
25-65 |
7 |
210 |
25-60 |
250*1200 |
37 |
30-78 |
8.2 |
210 |
25-60 |
300*1300 |
75 |
45-110 |
12 |
250 |
20-90 |
Application field
The crusher jaw is mainly used to crush various ores and medium-size bulk materials. It is widely used in mining, smelting, building materials, highway, railway, water conservancy, chemical and other industries. The maximum compressive strength of the crushed material is 320MPa.
Types
Crusher jaw is mainly used as coarse crusher and medium crusher in mining, building materials, infrastructure and other departments. According to the width of the feed inlet, it can be divided into three types : large, medium and small. The large machine with the width of the feed inlet greater than 600MM, the medium machine with the width of the feed inlet between 300 and 600MM, and the small machine with the width of the feed inlet less than 300MM. It has the advantages of simple structure, easy manufacture, reliable operation and easy maintenance.
Packing details
We will load different sizes of packaging according to different machine sizes, and the normal packaging is wooden boxes. If exported to European countries, the wooden frame will be fumigated. If the container is too tight, we will use PE film according to the customer's special requirements.
http://www.zhongxiangmachinery.com/
